Milwaukee MC120 PRO Digital pH Controller

A digital laboratory-grade measuring device for continuous and reliable measurement of pH values.

MC120 PRO Digital pH Controller gives you quick readings of the measured pH value on a user-friendly LCD display. It has an accuracy of ± 0.2 pH over the entire measurement range of 0.0 pH to 14.0 pH. The intelligent sensor activates an alarm if the pH measurement goes above or below the set range of 5.5 to 9.5 pH. This will help you keep the pH levels in the desired range.

The device is equipped with a low-maintenance dual connection MA911b/2 PH Electrode, 2 m Cable filled with gel. A 12 VDC adapter is included in the delivery.

Instructions for storage and care:

With regular care and proper maintenance, the pH measuring device will last a long time and provide reliable and accurate results.

► Tips for proper care:

• Always keep the pH tester wet during storage. Letting it dry out can damage the sensitivity of the probe or lead to clogging of the connection opening.
• It is best to store the probe in a pH storage solution or in pH calibration buffers. Make sure the probe cap is tight to prevent these solutions from leaking out. Never store the probe in tap water or DI water.
• Store the probe in an upright position.
• Clean the device regularly to remove any sample residues. Soak it in a cleaning solution.
• Calibrate the pH device regularly (with a two-point calibration) to ensure the accuracy of the measurements.